Syncro I/O - 4 Way Conventional Detection Zone Module

Description

Syncro I/O - 4 Way Conventional Detection Zone Module

  • To further enhance the versatility of the Syncro fire alarm system, four conventional detection circuits can be connected with up to 30 detectors per circuit.

  • Conventional control panels can be replaced with this simple module and existing conventional systems can be interfaced directly to modern analogue addressable control systems and networks.

  • A fail safe mode ensures that the detection inputs will still operate the sounder outputs and fire contact if communication to the Syncro panel is lost.

  • Up to 32 of these boards can be connected to the dedicated RS485 communications bus in the control panel giving the capability of up to 128 conventional zones with 64 sounder outputs.

  • The detection zone boards may be mixed on the RS485 bus with 16 channel I/O Boards, 6 way sounder boards or 8 way relay boards to provide a very flexible system of I/O to satisfy any requirement.

  •  All inputs and outputs are configurable in the same way as devices connected to the loops and all may be acted upon by cause and effect logic.

  • Standard Syncro control panels contain fixings for one (four way) Detection Zone board, Sounder board, Relay board or I/O board, all of which can easily be connected using four signal wires to the power and comms bus within the panel.

  • Consideration must be taken as to the loading on the main panel.

Earn 0 reward points with this purchase
Buy This Now
£POA

K545